UP Beaver Dam River Bridge


Click the photo to view the full-size version

1/10
Date Taken:
Author:
Caption:

Name UP Beaver Dam River Bridge
Chicago & North Western Railway Bridge #2543
Built By Milwaukee, Sparta & North Western Railway
Currently Owned By Union Pacific Railroad
Superstructure Contractor Bates & Rogers Construction Company of Chicago, Illinois
Length 200 Feet Total, 40 Foot Largest Span
Width 2 Tracks, 1 In Use (64 Feet)
Height Above Ground 25 Feet (Estimated)
Superstructure Design Concrete Arch
Substructure Design Concrete
Date Built 1910
Traffic Count 5 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 2543
Union Pacific Railroad Bridge Number 266.08
Significance Moderate Significance
Documentation Date 3/25/2016

In 1884, the Princeton & Western Railway (P&W) constructed a 13 mile branch from the existing Chicago, St. Paul, Minneapolis & Omaha Railway (Omaha Road) at Wyeville, Wisconsin to Necedah, Wisconsin.  The railroad soon came under lease of the Chicago & North Western Railway (C&NW).  During the early 20th Century, the C&NW began a program of improvements, constructing new cutoffs and significantly increasingly efficiency over the system, particularly in Wisconsin and northern Illinois.  In 1910, the Milwaukee, Sparta & North Western Railway (MS&NW), a subsidiary of the C&NW, began construction a new cutoff across central Wisconsin.  In 1912, the MS&NW completed 23 miles between Sparta, Wisconsin and Wyeville, Wisconsin; as well as 133 miles between Necedah and Wiscona, a railroad junction on the north side of Milwaukee.  The P&W was sold to the MS&NW in 1912, which was promptly consolidated into the C&NW.  This line provided a better connection for the C&NW through Wisconsin, and avoided the steep grades of the previous mainline from Sparta to Madison.  The line also improved the C&NW connection to the Twin Cities of Minneapolis and St. Paul by way of the C&NW controlled Omaha Road.  The line between Butler, Wisconsin and Clyman Junction, Wisconsin would be double tracked; while the remainder between Clyman Junction and Wyeville was built wide enough for a second track, but no second track was installed.

By the 1920s, the C&NW was operating an expansive railroad network throughout the Midwest, radiating north and west from Chicago.  This line served as one of the principal mainlines of the railroad, connecting Milwaukee to the Twin Cities.  In 1959, much of the second track between Butler and Clyman Junction was removed as operations over the line no longer warranted a second track.  The line remained largely unchanged until March 1973, when a tunnel collapsed at Tunnel City, Wisconsin.  This led to the line being abandoned west of Tunnel City, and a new connection track being constructed to the Chicago, Milwaukee, St. Paul & Pacific Railroad (Milwaukee Road) mainline, which the C&NW would use to reach Winona, Minnesota.  In 1995, the C&NW was purchased by the Union Pacific Railroad, the current owner of this line.  Today, UP operates the Wyeville Subdivision between Wyeville and Adams, Wisconsin; the Adams Subdivision between Adams and Wiscona; and the Winona Subdivision between Wyeville and Tunnel City.  The segment between Tunnel City and Sparta remains abandoned, although much of the infrastructure remains intact.


View an article discussing construction of the Milwaukee, Sparta & North Western Railway (digitalized by Google)

Located south of Beaver Dam, this large concrete arch bridge carries the former Chicago & North Western Railway mainline over the Beaver Dam River. Built in 1910 as subsidiary Milwaukee, Sparta & North Western Railway constructed a new line through the area, the bridge consists of a 40-foot and two 32-foot concrete arch spans, set onto concrete substructures and constructed at a width of 64 feet. Among the largest concrete arch bridges constructed for the MS&NW, the bridge is heavily skewed and was constructed for two tracks. It is unknown if the bridge ever carried two tracks, as many bridges along this route were constructed so a second track could easily be added. Due to the size of this structure, it is possible it was decided to construct the bridge for a second track without a second track being planned. Joints indicate that the bridge was constructed in several consecutive pours, likely with formwork that was continuously shifted as the bridge progressed. Typical of concrete bridges along this section of line, the Bates & Rogers Construction Company constructed the bridge. This company became one of the largest builders of concrete bridges in the Midwest, working on several prominent projects. Concrete arch bridges were commonly used by railroads, as they were durable and easy to construct. Currently, the bridge remains in use, and has seen few alterations since its original construction. Overall, the bridge appears to be in fair condition, with no significant deterioration noted. Various epoxy repairs have been made to the structure since it was first constructed. The author has ranked this bridge as being moderately significant, due to the large scale implementation of a common design.


Citations

Builder and build date Chicago & North Western Valuation Notes at the Chicago & North Western Historical Society Archives
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...