| Name | UP Unnamed Branch Buttrick Creek Culvert Chicago & North Western Railway Bridge #724 |
| Built By | Chicago & North Western Railway |
| Currently Owned By | Union Pacific Railroad |
| Contractor | Unknown (North Track) Widell Company of Mankato, Minnesota (South Track) |
| Length | 10 Feet Total |
| Width | 2 Tracks (50 Feet) |
| Height Above Ground | 10 Feet (Estimated) |
| Superstructure Design | Stone Arch Culvert |
| Substructure Design | Stone Masonry |
| Date Built | 1898, Widened 1900 |
| Traffic Count | 50 Trains/Day (Estimated) |
| Current Status | In Use |
| Chicago & North Western Railway Bridge Number | 724 |
| Significance | Local Significance |
| Documentation Date | 11/12/2017 |
In 1867, the Cedar Rapids & Missouri River Railroad (CR&MR) continued constructing a mainline westward from Boone, Iowa. In the late 1850s and early 1860s, the CR&MR had participated in constructing a line from Clinton, Iowa to Boone. The CR&MR was leased by the Chicago & North Western Railway (C&NW), which was seeking a route connecting Chicago to the Missouri River. In 1867, an impressive 150 miles were constructed between Boone, Iowa and Council Bluffs, Iowa, completing a connection between Chicago and the Missouri River. The line also allowed for a short spur from Missouri Valley, Iowa to the Missouri River opposite of Blair, Nebraska. This spur would eventually be extended across the Missouri River and into Nebraska. Between 1869 and 1872, Union Pacific Railroad (UP) constructed a bridge across the Missouri River between Council Bluffs and Omaha, Nebraska; and the C&NW obtained trackage rights over the bridge to reach Omaha. During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest. In 1884, the CR&MR was formally purchased by the C&NW; and this line quickly became a core asset of the C&NW system.
By the late 19th Century, traffic over this line had increased to the point significant upgrades were required. In 1893, a 5-mile section of railroad was relocated west of Jefferson, Iowa to improve grades and eliminate curves. One of the most significant barriers to efficient operation over this line was the Des Moines River Valley between Boone and Ogden, Iowa. The original route crossed the Des Moines River at Moingona, which was approached by winding and steep approaches on each bank. In 1899, C&NW subsidiary Boone County Railway (BCR) began construction on a more direct route between Boone and Ogden, Iowa; including a massive viaduct across the Des Moines River. The BCR was consolidated into the C&NW in 1900, and the new cutoff was completed in May 1901. The new alignment shortened the route by 3 miles, cut grades in half and only required two small curves. The original mainline through Moingona was maintained as an emergency backup and to serve industries in the area. Between 1901 and 1902, a second track was also constructed between Ogden and Council Bluffs, including a 5-mile realignment near Arcadia, Iowa. The double tracking of this line provided the C&NW with a well constructed double track mainline between Chicago and Council Bluffs.
By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago. The original mainline into Moingona was abandoned in 1930. This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago. Known as the Overland Route, this line became one of the most significant railroad routes in the United States. This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades. In 1995, the C&NW was purchased by UP, which provided UP with a mainline into the railroad hub of Chicago. Into the 21st Century, the line has seen continuous upgrades, and remains one of the most significant railroad lines in the United States. Today, UP operates this line as the Boone Subdivision between Boone and Missouri Valley; and the Omaha Subdivision between Missouri Valley and Council Bluffs.
Located west of Grand Junction, this stone arch culvert carries a former Chicago & North Western Railway mainline over an unnamed tributary of Buttrick Creek. The first bridge at this location likely consisted of a timber pile trestle, constructed when the line was first built. In 1898, the bridge was replaced by a single track stone arch culvert. Between 1899 and 1902, the C&NW invested significant capital into this line, double tracking the route between Cedar Rapids, Iowa and Council Bluffs, Iowa. In 1900, the culvert was widened to the south, giving the culvert its present configuration. Currently, the culvert consists of a 10-foot stone arch culvert, set onto stone substructures and constructed for two tracks at a width of 50 feet. The structure follows a standard design, with a semicircular arch and stepped wing walls. On the north face, the wing walls extends diagonally; while the south face wing walls extend perpendicularly from the culvert. Stone for the structure consists of a yellow limestone, likely quarried at Mankato, Minnesota. An unknown contractor constructed the north portion of the culvert, while it is believed that the Widell Company constructed the south portion. This firm was reportedly awarded a large contract for the stonework required for double tracking this line, and also received additional contracts for most work along the Iowa Division between 1898 and 1902. Stone arches were popular for railroad use, as they were durable and easy to construct. Since the initial construction, no significant alterations have been made and the culvert remains in regular use. Overall, the culvert appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this culvert as being locally significant, due to the common design.
Citations
| Build dates | Chicago & North Western Railway Valuation Notes at the Chicago & North Western Historical Society Archives |
| Builder (south track) | The Improvement Bulletin; November 18, 1899 |
| Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |