UP Grand Avenue Bridge (Ames)


Click the photo to view the full-size version

1/21
Date Taken:
Author:
Caption:

Name UP Grand Avenue Bridge (Ames)
Chicago & North Western Railway Bridge #562 1/4
Built By Chicago & North Western Railway
Currently Owned By Union Pacific Railroad
Superstructure Contractor American Bridge Company of New York
Substructure Contractor Ben Cole & Son of Ames, Iowa
Length 91 Feet Total, 50 Foot Main Span
Width 4 Tracks
Height Above Ground 15 Feet (Estimated)
Superstructure Design Steel Stringer
Substructure Design Concrete
Date Built 1938
Traffic Count 50 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 562 1/4
Union Pacific Railroad Bridge Number 189.05
Significance Local Significance
Documentation Date 10/16/2017

In 1856, the Chicago, Iowa & Nebraska Rail Road (CI&N) began construction on a new mainline across Iowa, connecting an existing Galena & Chicago Union Railroad (G&CU) line at Fulton, Illinois to the Missouri River.  To establish construction, a temporary ferry was installed across the Mississippi River at Clinton in 1856.  In 1857, the first 44 miles were completed to Wheatland, Iowa.  The following year, 20 miles were completed to Lisbon, Iowa; and in 1859, an addition 17 miles were completed to Cedar Rapids, Iowa.  In 1861, the Cedar Rapids & Missouri River Railroad (CR&MR) constructed an additional 41 miles to Chelsea, Iowa; followed by 29 miles to Marshalltown, Iowa in 1862.  After pausing in 1863, an additional 29 miles were completed to Nevada, Iowa in 1864, followed by 23 additional miles to Boone, Iowa in 1865. In 1864, both the CI&N and CR&MR were leased by the Chicago & North Western Railway (C&NW). In 1867, the line continued west from Boone, reaching the Missouri River at Council Bluffs, Iowa in 1867.

During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest.  This line formed a principal mainline for the C&NW, connecting western railroads at Omaha to the railroad hub of Chicago.  In  1884, the C&IN and CM&MR were formally acquired by the C&NW.  In 1887, the Linn County Railway (LC) constructed a 6-mile cutoff, bypassing Cedar Rapids to the south between Otis, Iowa and Beverly, Iowa.  At the end of the year, the LC was formally acquired by the C&NW.  During the late 19th Century, several other improvements were made to this line.  Between 1890 and 1891, a second track was constructed between Clinton and Lowden, Iowa; and between Libson and the Cedar River bridge.  Between 1893 and 1894, a second track was constructed between Lowden and Lisbon.  A second track was added to the original mainline through Cedar Rapids in 1898, and between 1898 and 1899, a second track was constructed between the Cedar River bridge and the west side of Marshalltown.  In 1901, a second track was completed between Marshalltown and Boone, and new facilities were constructed at Boone. Throughout the 20th Century, the Cedar River bridge remained a gauntlet structure, severely hindering efficient operations.

By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago.  This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago.  Known as the Overland Route, this line became one of the most significant railroad routes in the United States.  This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades.  In 1995, the C&NW was purchased by Union Pacific Railroad (UP).  In 2002, UP constructed a second track at the Cedar River bridge, eliminating a single track bottleneck in the network.  Today, this line remains vital to UP and is still well maintained.  The Clinton to Boone segment is known as the Clinton Subdivision, and remains a heavily used double track mainline.


Located in downtown Ames, this steel stringer bridge carries a former Chicago & North Western Railway mainline over Grand Avenue (US Highway 69). Prior to the construction of this bridge, a grade crossing existed at this location. This grade crossing was particularly dangerous, as it crossed both the C&NW mainline and a C&NW branch line towards Des Moines. In the 1920s and 1930s, the Iowa State Highway Commission began a series of improvements to upgrade roadways throughout the state and construct grade separations at intersections with railroads. Three underpasses were proposed at this location in the mid-1930s, with a structure carrying the C&NW mainline, a structure carrying the C&NW branch line and a third structure carrying 6th Street over Grand Avenue. Contracts for construction were awarded in August 1937, with the new underpasses opening the following summer. Currently, this bridge consists of a 50-foot and two 20-foot steel stringer spans, set onto concrete substructures and constructed for four tracks. The superstructure follows a standard design, with six or seven beams per track and a ballast deck. The piers consist of an art-deco design with concrete columns connected by arches at the top, while the abutments use a standard U-shaped design. American Bridge Company fabricated the superstructure, while local contractor Ben Cole & Son constructed the substructures. Steel stringer spans were popular for railroad use, as they were durable and easy to construct. Since the initial construction, the bridge has seen few changes, although the northernmost track is currently unused. The branch line underpass was removed in the late 1980s, while the 6th Street underpass remains today. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked the bridge as being locally significant, due to the common design.


Citations

Build date and builder (superstructure) American Bridge Company plaque
Builder (substructure) Ames Tribune; July 19, 1938
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...