UP Stange Road Bridge


Click the photo to view the full-size version

1/8
Date Taken:
Author:
Caption:

Name UP Stange Road Bridge
Chicago & North Western Railway Bridge #566 1/2
Built By Chicago & North Western Railway
Currently Owned By Union Pacific Railroad
Superstructure Contractor Unknown
Substructure Contractor Welden Bros. of Iowa Falls, Iowa
Length 74 Feet Total
Width 2 Tracks
Height Above Ground 15 Feet (Estimated)
Superstructure Design Through Plate Girder
Substructure Design Concrete
Date Built 1963
Traffic Count 50 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 566 1/2
Union Pacific Railroad Bridge Number 190.49
Significance Minimal Significance
Documentation Date 11/11/2016

In 1856, the Chicago, Iowa & Nebraska Rail Road (CI&N) began construction on a new mainline across Iowa, connecting an existing Galena & Chicago Union Railroad (G&CU) line at Fulton, Illinois to the Missouri River.  To establish construction, a temporary ferry was installed across the Mississippi River at Clinton in 1856.  In 1857, the first 44 miles were completed to Wheatland, Iowa.  The following year, 20 miles were completed to Lisbon, Iowa; and in 1859, an addition 17 miles were completed to Cedar Rapids, Iowa.  In 1861, the Cedar Rapids & Missouri River Railroad (CR&MR) constructed an additional 41 miles to Chelsea, Iowa; followed by 29 miles to Marshalltown, Iowa in 1862.  After pausing in 1863, an additional 29 miles were completed to Nevada, Iowa in 1864, followed by 23 additional miles to Boone, Iowa in 1865. In 1864, both the CI&N and CR&MR were leased by the Chicago & North Western Railway (C&NW). In 1867, the line continued west from Boone, reaching the Missouri River at Council Bluffs, Iowa in 1867.

During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest.  This line formed a principal mainline for the C&NW, connecting western railroads at Omaha to the railroad hub of Chicago.  In  1884, the C&IN and CM&MR were formally acquired by the C&NW.  In 1887, the Linn County Railway (LC) constructed a 6-mile cutoff, bypassing Cedar Rapids to the south between Otis, Iowa and Beverly, Iowa.  At the end of the year, the LC was formally acquired by the C&NW.  During the late 19th Century, several other improvements were made to this line.  Between 1890 and 1891, a second track was constructed between Clinton and Lowden, Iowa; and between Libson and the Cedar River bridge.  Between 1893 and 1894, a second track was constructed between Lowden and Lisbon.  A second track was added to the original mainline through Cedar Rapids in 1898, and between 1898 and 1899, a second track was constructed between the Cedar River bridge and the west side of Marshalltown.  In 1901, a second track was completed between Marshalltown and Boone, and new facilities were constructed at Boone. Throughout the 20th Century, the Cedar River bridge remained a gauntlet structure, severely hindering efficient operations.

By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago.  This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago.  Known as the Overland Route, this line became one of the most significant railroad routes in the United States.  This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades.  In 1995, the C&NW was purchased by Union Pacific Railroad (UP).  In 2002, UP constructed a second track at the Cedar River bridge, eliminating a single track bottleneck in the network.  Today, this line remains vital to UP and is still well maintained.  The Clinton to Boone segment is known as the Clinton Subdivision, and remains a heavily used double track mainline.


Located on the north side of the Iowa State University campus, this through plate girder bridge carries a former Chicago & North Western Railway mainline over Stange Road. It is unclear if there was a bridge at this location in the 19th Century. Between 1898 and 1902, the C&NW undertook a large double tracking project between Cedar Rapids, Iowa and Council Bluffs, Iowa. In 1900, a new steel stringer bridge on stone abutments was constructed at this location. In 1932, the bridge was altered and a new concrete encased beam span was installed on the original stone abutments. While this bridge provided a safe way to cross underneath the busy railroad, it only permitted one lane of traffic underneath. In the early 1960s, the Iowa State Highway Commission, the City of Ames and Iowa State University worked with the railroad to construct a wider underpass and rebuild Stange Road. Contracts were awarded in November 1962, and a temporary shoo-fly was constructed soon after. The bridge was completed in mid-1963. Currently, the bridge consists of a double track 74-foot through plate girder span, set onto concrete abutments. The superstructure follows a standard design, with two heavy plate girders, a ballast deck and rounded and tapered girder ends. The substructures also follow a standard design for the era, with sloped wing walls and minor decorative features. An unknown contractor fabricated the superstructure, while Welden Bros. constructed the substructure. Through plate girder spans were popular for railroad use, as they were durable and easy to construct. Since the initial construction, the bridge has seen no significant alterations, and remains in regular use. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being minimally significant, due to the newer age.


Citations

Build date Chicago & North Western Railway Drawing Collection at the Chicago & North Western Historical Society Archives
Builder (substructure) Ames Tribune; November 16, 1962
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...