C&NW Harmony Avenue Bridge


Click the photo to view the full-size version

1/15
Date Taken:
Author:
Caption:

Name C&NW Harmony Avenue Bridge
Chicago & North Western Railway Bridge #2817
Built By Milwaukee, Sparta & North Western Railway
Currently Owned By Wisconsin Department of Natural Resources
Superstructure Contractor King Bridge Company of Cleveland, Ohio
Substructure Contractor Cleary-White Construction Company of Chicago, Illinois
Length 30 Feet Total
Width 1 Track
Height Above Ground 13 Feet 3 Inches
Superstructure Design Through Plate Girder
Substructure Design Concrete
Date Built 1911
Traffic Count 0 Trains/Day (Bridge is Open to Pedestrian Traffic)
Current Status Open to Pedestrian Traffic
Chicago & North Western Railway Bridge Number 2817
Significance Local Significance
Documentation Date 1/1/2018

In 1884, the Princeton & Western Railway (P&W) constructed a 13 mile branch from the existing Chicago, St. Paul, Minneapolis & Omaha Railway (Omaha Road) at Wyeville, Wisconsin to Necedah, Wisconsin.  The railroad soon came under lease of the Chicago & North Western Railway (C&NW).  During the early 20th Century, the C&NW began a program of improvements, constructing new cutoffs and significantly increasingly efficiency over the system, particularly in Wisconsin and northern Illinois.  In 1910, the Milwaukee, Sparta & North Western Railway (MS&NW), a subsidiary of the C&NW, began construction a new cutoff across central Wisconsin.  In 1912, the MS&NW completed 23 miles between Sparta, Wisconsin and Wyeville, Wisconsin; as well as 133 miles between Necedah and Wiscona, a railroad junction on the north side of Milwaukee.  The P&W was sold to the MS&NW in 1912, which was promptly consolidated into the C&NW.  This line provided a better connection for the C&NW through Wisconsin, and avoided the steep grades of the previous mainline from Sparta to Madison.  The line also improved the C&NW connection to the Twin Cities of Minneapolis and St. Paul by way of the C&NW controlled Omaha Road.  The line between Butler, Wisconsin and Clyman Junction, Wisconsin would be double tracked; while the remainder between Clyman Junction and Wyeville was built wide enough for a second track, but no second track was installed.

By the 1920s, the C&NW was operating an expansive railroad network throughout the Midwest, radiating north and west from Chicago.  This line served as one of the principal mainlines of the railroad, connecting Milwaukee to the Twin Cities.  In 1959, much of the second track between Butler and Clyman Junction was removed as operations over the line no longer warranted a second track.  The line remained largely unchanged until March 1973, when a tunnel collapsed at Tunnel City, Wisconsin.  This led to the line being abandoned west of Tunnel City, and a new connection track being constructed to the Chicago, Milwaukee, St. Paul & Pacific Railroad (Milwaukee Road) mainline, which the C&NW would use to reach Winona, Minnesota.  In 1995, the C&NW was purchased by the Union Pacific Railroad, the current owner of this line.  Today, UP operates the Wyeville Subdivision between Wyeville and Adams, Wisconsin; the Adams Subdivision between Adams and Wiscona; and the Winona Subdivision between Wyeville and Tunnel City.  The segment between Tunnel City and Sparta remains abandoned, although much of the infrastructure remains intact.


Located on the east side of Sparta, this small through plate girder bridge carries the former Chicago & North Western Railway over Harmony Avenue. In 1911, the bridge was constructed as part of a new line between Sparta and Milwaukee. The bridge consists of a 30-foot through plate girder span, set onto concrete substructures. The superstructure uses a variation of a standard through plate girder design used for some C&NW bridges, with shallow girders, an unusual floor and square girder ends. The floor is unusually constructed, using sets of large riveted beams for floorbeams and four sets of stringers arranged into two sets of two. This type of floor used more floorbeams than typical, allowing the girders to be constructed with a shallower design and the floorbeams to be lighter than usual. The abutments use a standard design, and are constructed of concrete with diagonal wing walls, and are founded on timber piles. King Bridge Company fabricated the superstructure, while the Cleary-White Construction Company constructed the substructures. Through plate girder spans were commonly used by railroads, as they were durable and easy to construct. After a tunnel at Tunnel City collapsed in 1973, this line was abandoned, and this portion acquired by the Wisconsin Department of Natural Resources. The bridge is now used as part of a short trail, which connects the Elroy-Sparta State Trail and La Crosse River State Trail to the east side of Sparta. Overall, the bridge appears to be in fair condition, with some spalling noted throughout the substructure. The author has ranked this bridge as being locally significant, due to the common design.


Citations

Builders and build date Chicago & North Western Valuation Notes at the Chicago & North Western Historical Society Archives
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...