| Name | UP County E41 Bridge (Nevada) Chicago & North Western Railway Bridge #534 |
| Built By | Chicago & North Western Railway |
| Currently Owned By | Union Pacific Railroad |
| Superstructure Contractor | American Bridge Company of New York |
| Substructure Contractor | Unknown |
| Length | 50 Feet Total |
| Width | 2 Tracks |
| Height Above Ground | 13 Feet 6 Inches |
| Superstructure Design | Deck Plate Girder |
| Substructure Design | Concrete |
| Date Built | 1918 |
| Traffic Count | 50 Trains/Day (Estimated) |
| Current Status | In Use |
| Chicago & North Western Railway Bridge Number | 534 |
| Union Pacific Railroad Bridge Number | 177.30 |
| Significance | Local Significance |
| Documentation Date | 7/22/2012; 10/7/2016 |
In 1856, the Chicago, Iowa & Nebraska Rail Road (CI&N) began construction on a new mainline across Iowa, connecting an existing Galena & Chicago Union Railroad (G&CU) line at Fulton, Illinois to the Missouri River. To establish construction, a temporary ferry was installed across the Mississippi River at Clinton in 1856. In 1857, the first 44 miles were completed to Wheatland, Iowa. The following year, 20 miles were completed to Lisbon, Iowa; and in 1859, an addition 17 miles were completed to Cedar Rapids, Iowa. In 1861, the Cedar Rapids & Missouri River Railroad (CR&MR) constructed an additional 41 miles to Chelsea, Iowa; followed by 29 miles to Marshalltown, Iowa in 1862. After pausing in 1863, an additional 29 miles were completed to Nevada, Iowa in 1864, followed by 23 additional miles to Boone, Iowa in 1865. In 1864, both the CI&N and CR&MR were leased by the Chicago & North Western Railway (C&NW). In 1867, the line continued west from Boone, reaching the Missouri River at Council Bluffs, Iowa in 1867.
During the second half of the 19th Century, the C&NW had constructed and acquired a large amount of trackage throughout the Midwest. This line formed a principal mainline for the C&NW, connecting western railroads at Omaha to the railroad hub of Chicago. In 1884, the C&IN and CM&MR were formally acquired by the C&NW. In 1887, the Linn County Railway (LC) constructed a 6-mile cutoff, bypassing Cedar Rapids to the south between Otis, Iowa and Beverly, Iowa. At the end of the year, the LC was formally acquired by the C&NW. During the late 19th Century, several other improvements were made to this line. Between 1890 and 1891, a second track was constructed between Clinton and Lowden, Iowa; and between Libson and the Cedar River bridge. Between 1893 and 1894, a second track was constructed between Lowden and Lisbon. A second track was added to the original mainline through Cedar Rapids in 1898, and between 1898 and 1899, a second track was constructed between the Cedar River bridge and the west side of Marshalltown. In 1901, a second track was completed between Marshalltown and Boone, and new facilities were constructed at Boone. Throughout the 20th Century, the Cedar River bridge remained a gauntlet structure, severely hindering efficient operations.
By the 20th Century, the C&NW was operating an extensive railroad network, which radiated north and west from Chicago. This line served as the backbone of the C&NW, connecting transcontinental freight and passengers at Omaha to Chicago. Known as the Overland Route, this line became one of the most significant railroad routes in the United States. This route saw continuous upgrades during the 20th Century, including significant bridge, rail, tie and signal upgrades. In 1995, the C&NW was purchased by Union Pacific Railroad (UP). In 2002, UP constructed a second track at the Cedar River bridge, eliminating a single track bottleneck in the network. Today, this line remains vital to UP and is still well maintained. The Clinton to Boone segment is known as the Clinton Subdivision, and remains a heavily used double track mainline.
Located east of Nevada, this deck plate girder bridge carries a former Chicago & North Western Railway mainline over County Road E41/Lincoln Highway (former US Highway 30). In 1913, the Lincoln Highway was designated to connect San Francisco, California with New York City. This named highway was one of the first major east-west roadways designated in the United States, and was developed at a time when automobile travel was becoming a popular method of transportation. Originally, the road crossed over the adjacent Chicago, Rock Island & Pacific Railway line on a rickety wooden viaduct, before crossing the C&NW mainline at grade. This crossing was one of the most dangerous crossings along the Lincoln Highway, and quickly became a priority to fix. In 1917, the Iowa State Highway Commission worked with the C&NW and Rock Island to reconfigure the crossing, with an agreement reached for an underpass under the C&NW line in early 1917. Construction began later that year, and was completed in mid-1918. Currently, the bridge consists of a 50-foot double track deck plate girder span, set onto concrete abutments. In addition, the entire bridge is set at a heavy skew. The superstructure follows a standard design for shallow girders, with four girder lines and an open deck. The abutments use a non-standard design with sloped wing walls extending at different angles, due to the skew of the crossing. American Bridge Company fabricated the superstructure, while an unknown contractor constructed the abutments. Deck plate girder spans were commonly used by railroads, as they were durable and easy to construct. Since the initial construction, the bridge has seen no significant alterations, and remains in regular use. Overall, the bridge appears to be in fair condition, with some spalling noted on the substructures. The author has ranked this bridge as being locally significant, due to the common design.
Citations
| Build date and builder (superstructure) | American Bridge Company plaque |
| Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |