Name | Abandoned Lawrence Avenue Bridge (Portage Park) Chicago & North Western Railway Bridge #522 |
Built By | Chicago & North Western Railway |
Currently Owned By | Union Pacific Railroad |
Superstructure Contractor | American Bridge Company of New York |
Substructure Contractor | Unknown |
Length | 72 Feet Total, 36 Foot Spans |
Width | 3 Tracks |
Height Above Ground | 12 Feet 10 Inches |
Superstructure Design | Trough Floor Steel Stringer |
Substructure Design | Concrete and Steel Bent |
Date Built | 1928 |
Traffic Count | 0 Trains/Day (Bridge is Abandoned) |
Current Status | Abandoned |
522 | |
6.10 | |
Significance | Local Significance |
Documentation Date | 7/7/2018 |
In the late 19th Century, Chicago grew to the prominent railroad hub in the central United States. Chicago also served as the dividing point between the railroads operating in the east and railroads operating in the Midwest. The Chicago & North Western Railway (C&NW) had constructed three principal railroad lines, radiating north, northwest and west from Chicago. In 1872, the C&NW constructed five miles of new railroad line along Kenton Avenue in Chicago, connecting the West Line (Galena Division) near present-day Pulaski Road to the Northwest Line (Wisconsin Division) at Mayfair. In 1889, the Junction Railway Company (JRC) was funded by the C&NW to construct a double track extension from Mayfair, north to the North Line (Milwaukee Division) at Canal (north Evanston). At the same time, the C&NW constructed a second track along the Kenton Avenue segment. In 1891, the JRC was merged into the C&NW.
This line primarily served as a freight bypass of downtown Chicago, connecting to the Belt Railway of Chicago at the south end of the line. In the late 19th Century, railroad traffic had become a significant
safety hazard for the City of Chicago. A solution was devised to
elevate the railroad tracks throughout the city, placing the railroads
upon embankments and constructing subways at each street. In 1899, the C&NW completed a track elevation project at Milwaukee Avenue and Irving Park Road; followed by the section from Milwaukee Avenue to 40th Street (Pulaski Road) in 1906. Further improvements were made in 1928, when the line was elevated north of Mayfair.
The C&NW would become a prominent railroad in the Midwest,
eventually building a system over 11,000 miles long. By the mid 20th Century, this route slowly had lost importance. Freight traffic would mainly use the Milwaukee Subdivision, another freight bypass located west of this route. Local traffic along the line gradually faded, and portions of the line would be abandoned. The C&NW abandoned the line from Oakton Street to Canal in 1985, followed by the section between River Junction and Oakton Street in 1988. In approximately 1990, the line south of Armitage Avenue would be abandoned, severing the connection to the Galena Division. In 1995, the
C&NW would be purchased by the Union Pacific Railroad. The Union Pacific continues to operate the Mayfair to Armitage Avenue segment as the Cragin Industrial Lead. The remainder of the line is abandoned, but the grade and structures remain largely intact.
Located in the Portage Park neighborhood of Chicago, this steel stringer bridge carries an abandoned Union Pacific Railroad line over Lawrence Avenue. In the late 19th Century, the numerous grade crossings throughout the city represented a hazard to the general public. In response, the City of Chicago passed numerous ordinances, requiring the elevation of freight railroads within city limits. By the 1910s, many of the major railroads within the city had been elevated. At street crossings, subways were constructed to carry railroads over the roadway. An ordinance was passed on December 29, 1913, requiring the elevation of the Chicago & North Western Railway Weber line between Mayfair and Foster Avenue. With the requirements, the city allowed for a lenient completion date of July 1st, 1927. Work did not begin until 1927, with the majority of the construction completed in 1928, in conjunction with the adjacent Chicago, Milwaukee & St. Paul Railway elevation and the construction of a third track on this line. Typical of 20th Century track elevations, the line was constructed with concrete retaining walls, and was generally constructed for three tracks.
The bridge at Lawrence Avenue uses a typical design for track elevation projects in Chicago, consisting of two 36-foot trough floor steel stringer spans, set onto concrete abutments and a steel bent pier. The bridge runs at a slight skew, was constructed for three tracks, and the abutments of the bridge utilize some minor decorative features. American Bridge Company fabricated the superstructure of the bridge, and the substructure was constructed by an unknown contractor. This design of bridge became popular with railroads during the early 20th Century, particularly for track elevation projects. The design allowed for a ballast deck, which reduced maintenance to the railroad, and provided safe passage for the public beneath. Overall, the bridge appears to remain in fair condition, with some deterioration noted throughout the structure. The future of the bridge is uncertain, and it has not seen a train since the early 2000s. The author has ranked the bridge as being locally significant, due to the common design.
Citations
Builder and build date | American Bridge Company plaque |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |