UP S. Fork Lemonweir River Bridge (North)


Click the photo to view the full-size version

1/15
Date Taken:
Author:
Caption:

Name UP S. Fork Lemonweir River Bridge (North)
Chicago & North Western Railway Bridge #2767
Built By Chicago & North Western Railway
Currently Owned By Union Pacific Railroad
Superstructure Contractor Lassig Bridge & Iron Works of Chicago (Main Span)
Unknown (Approach Span)
Substructure Contractor Unknown
Length 101 Feet Total, 80 Foot Main Span
Width 2 Tracks, 1 In Use
Height Above Ground 10 Feet (Estimated)
Superstructure Design Through Plate Girder and Steel Stringer
Substructure Design Concrete
Date Fabricated c. 1900 (Main Span)
c. 1910 (Approach Span)
Date Erected 1927 (Main Span)
c. 1965 (Approach Span)
Original Location Unknown (Main Span)
Unknown (Approach Span)
Traffic Count 5 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 2767
Union Pacific Railroad Bridge Number 173.63
Significance Local Significance
Documentation Date 1/1/2018

In 1884, the Princeton & Western Railway (P&W) constructed a 13 mile branch from the existing Chicago, St. Paul, Minneapolis & Omaha Railway (Omaha Road) at Wyeville, Wisconsin to Necedah, Wisconsin.  The railroad soon came under lease of the Chicago & North Western Railway (C&NW).  During the early 20th Century, the C&NW began a program of improvements, constructing new cutoffs and significantly increasingly efficiency over the system, particularly in Wisconsin and northern Illinois.  In 1910, the Milwaukee, Sparta & North Western Railway (MS&NW), a subsidiary of the C&NW, began construction a new cutoff across central Wisconsin.  In 1912, the MS&NW completed 23 miles between Sparta, Wisconsin and Wyeville, Wisconsin; as well as 133 miles between Necedah and Wiscona, a railroad junction on the north side of Milwaukee.  The P&W was sold to the MS&NW in 1912, which was promptly consolidated into the C&NW.  This line provided a better connection for the C&NW through Wisconsin, and avoided the steep grades of the previous mainline from Sparta to Madison.  The line also improved the C&NW connection to the Twin Cities of Minneapolis and St. Paul by way of the C&NW controlled Omaha Road.  The line between Butler, Wisconsin and Clyman Junction, Wisconsin would be double tracked; while the remainder between Clyman Junction and Wyeville was built wide enough for a second track, but no second track was installed.

By the 1920s, the C&NW was operating an expansive railroad network throughout the Midwest, radiating north and west from Chicago.  This line served as one of the principal mainlines of the railroad, connecting Milwaukee to the Twin Cities.  In 1959, much of the second track between Butler and Clyman Junction was removed as operations over the line no longer warranted a second track.  The line remained largely unchanged until March 1973, when a tunnel collapsed at Tunnel City, Wisconsin.  This led to the line being abandoned west of Tunnel City, and a new connection track being constructed to the Chicago, Milwaukee, St. Paul & Pacific Railroad (Milwaukee Road) mainline, which the C&NW would use to reach Winona, Minnesota.  In 1995, the C&NW was purchased by the Union Pacific Railroad, the current owner of this line.  Today, UP operates the Wyeville Subdivision between Wyeville and Adams, Wisconsin; the Adams Subdivision between Adams and Wiscona; and the Winona Subdivision between Wyeville and Tunnel City.  The segment between Tunnel City and Sparta remains abandoned, although much of the infrastructure remains intact.


Located near Excelsior Avenue in Wyeville, this through plate girder bridge carries the former Chicago & North Western Railway over the South Fork Lemonweir River. The first bridge at this location was a 9 span timber pile trestle, constructed when the line was first built. In 1927, the bridge was reconstructed with a secondhand through plate girder span, set onto a concrete pier and abutment, and approached by a single timber pile trestle on the west end. The bridge was again rebuilt in approximately 1960, when a secondhand steel stringer span was installed on the west end, and a new concrete abutment constructed. Currently, the bridge consists of a double track 80-foot through plate girder span, approached by a 21-foot steel stringer span on the west end, set onto concrete substructures. The through plate girder span was fabricated by the Lassig Bridge & Iron Works in approximately 1900 for an unknown location. During the mid-1920s, some double track bridges on the Iowa Division mainline were replaced, and it is possible this span is from that line. The through girder span uses a standard design, with heavy girders, a traditionally composed floor and square girder ends. The approach span was originally fabricated in approximately 1910 by an unknown contractor for use at an unknown location. This span uses a standard design, with shallow beams. The concrete substructures were constructed by unknown contractors. Through plate girder spans were commonly used by railroads, as they were durable and easy to construct. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. Currently, only the south track remains in use, and there is no approach to the north track. The author has ranked this bridge as being locally significant, due to the common design.


Citations

Build date Chicago & North Western Valuation Map at the Chicago & North Western Historical Society Archives
Builder (main span) Missing Lassig Bridge & Iron Works plaque
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...