Name | UP Stranger Creek Bridge (Linwood) Union Pacific Railroad Bridge #27.86 |
Built By | Union Pacific Railroad |
Currently Owned By | Union Pacific Railroad |
Superstructure Contractor | American Bridge Company of New York |
Engineer | James Keys |
Length | 138 Feet Total |
Width | 2 Tracks |
Height Above Ground | 20 Feet (Estimated) |
Superstructure Design | Baltimore Through Truss |
Substructure Design | Concrete |
Date Built | 1905 |
Traffic Count | 50 Trains/Day (Estimated) |
Current Status | In Use |
Union Pacific Railroad Bridge Number | 27.86 |
Significance | Moderate Significance |
Documentation Date | 9/3/2016 |
After the Pacific Railway Act of 1862, numerous railroads were charting routes from the Midwest to the Pacific using federal land grants. The Leavenworth, Pawnee and Western Railroad was initially authorized by the Kansas Legislature in 1855, and changed the name to the Union Pacific Railway, Eastern Division (UP-ED) in 1863. In 1864, the UP-ED began construction on a 40 mile railroad line, extending from Kansas City, Missouri westwards towards Denver. The railroad reached Salina, Kansas by 1865, and an additional 97 miles to Fort Riley, Kansas opened in 1866. In 1867, an additional 152 miles to Hays, Kansas would open to traffic, followed by an additional 116 miles to McAllaster, Colorado in 1869. The UP-ED would be merged into the Kansas Pacific Railway (KP) in 1869. The KP continued construction westwards, constructing an additional 234 miles to Denver, Colorado in 1870. The KP was sold to the Union Pacific Railway in 1880. The railroad would change its name to the Union Pacific Railroad in 1901. The UP had constructed a vast network of railroads, extending from the Missouri River westwards. This route served as a secondary mainline for the railroad, roughly paralleling the First Transcontinental Railroad, which was constructed north of this line in Nebraska. Between 1901 and 1905, significant upgrades were made to this line, including realignments and new bridges, and a second track from Kansas City to Topeka was constructed in 1906. Since the initial construction, little has changed with this line. UP spent significant capital upgrading the route in the 1990s, although traffic has slowed considerably in the 2010s. Today, UP operates the Kansas Subdivision between Kansas City and Menoken, the Salina Subdivision between Menoken and Salina, the Sharon Springs Subdivision between Salina and Sharon Springs, and the Limon Subdivision from Sharon Springs to Denver.
View an article discussing the double tracking of this line
Located on the east side of Linwood, this through truss bridge carries the Union Pacific Railroad mainline over Stranger Creek. Built in 1905, the bridge features a single 138-foot riveted 5-panel Baltimore through truss span, set onto concrete abutments. The truss utilizes a design commonly seen along the Union Pacific, including riveted connections, heavy members and a lattice portal. The use of a Baltimore through truss for such a short span is relatively uncommon, although the Union Pacific utilized the design extensively, particularly for double track structures. A number of similar structures exist between Kansas City and Topeka. The Baltimore design was occasionally used by railroads throughout the United States, as it provided a strong truss design for medium to long spans. Some of the longest spans of this design constructed for railroad exceed 400 feet in length. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being moderately significant, due to the truss design.
Citations
Build date | Date cutout |
Builder | American Bridge Company plaque |
Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |