| Name | CN Lake Wissota Bridge Wisconsin Central Railway Bridge #715 |
| Built By | Minneapolis, St. Paul & Sault Ste. Marie Railway |
| Currently Owned By | Canadian National Railway |
| Superstructure Contractor | Unknown |
| Substructure Contractor | Unknown |
| Length | 180 Feet Total, 80 Foot Main Span |
| Width | 1 Track |
| Height Above Ground | 5 Feet (Estimated) |
| Superstructure Design | Through Plate Girder |
| Substructure Design | Concrete |
| Date Built | 1916 |
| Traffic Count | 5 Trains/Day (Estimated) |
| Current Status | In Use |
| Minneapolis, St. Paul & Sault Ste. Marie Railway Bridge Number | 715 |
| Canadian National Railway Bridge Number | 346.64 |
| Significance | Local Significance |
| Documentation Date | 5/12/2012; 9/7/2024 |
In 1880, the Wisconsin and Minnesota Railroad (W&M) would complete 54 miles of new railroad extending from Abbotsford to Chippewa Falls, Wisconsin. By 1885, 109 additional miles would be completed from Chippewa Falls to St. Paul, Minnesota. In 1888, the W&M would be acquired by the Wisconsin Central Railroad, which would be renamed the Wisconsin Central Railway (WC) in 1899. The WC had previously completed a mainline, extending from Chicago to Abbotsford. In 1909, the WC would be leased by the Minneapolis, St. Paul & Sault Ste. Marie Railway (Soo Line), which itself was controlled by the Canadian Pacific Railway (CP). The Soo Line had constructed a large network of railroads, connecting the Upper Midwest with Canadian Railroads.
In 1910, the WC began a series of projects to reconstruct the route. The largest project was a new 18-mile alignment between Withrow and New Richmond, Wisconsin and the bridge over the St. Croix River, which opened in 1911. This new alignment reduced the amount of grades and curves, and provided a connection to the Soo Line tracks at Withrow. Additional relocations included 19 miles between Owen and Spencer which bypassed Abbotsford, and 11 miles between Colfax and Howard. The old St. Croix River bridge would be scrapped in 1916, the Abbotsford to Curtiss segment abandoned in 1934, and the Curtiss to Owen segment abandoned in 1938. By 1961, the WC, Soo Line and Duluth, South Shore & Atlantic would be merged to form Soo Line Corporation, a holding company controlled by Canadian Pacific Railway. The segment between St. Paul and Carnelian Junction would be abandoned in 1980, and acquired by the Minnesota DNR. In 1984, the Soo Line would be reorganized as the Soo Line Corporation in advance of a pending purchase of the Chicago, Milwaukee, St. Paul & Pacific Railroad (Milwaukee Road).
After the Soo Line acquired the Milwaukee Road in 1986, this route became less important, as the Milwaukee Road purchase provided Soo with additional connections between Chicago and St. Paul. In 1987, the route would be sold to Wisconsin Central, Ltd. Known as the "new" Wisconsin Central, the railroad acquired several excess rail lines from the Soo Line and C&NW, before being acquired as the American subsidiary of Canadian National Railway in 2001. Today, the Gateway Trail utilizes the line between Carnelian Junction and St. Paul, while CN operates the remainder of the line as the Minneapolis Subdivision, part of the principal CN connection between Minneapolis and Chicago.
Located along County Road X east of Chippewa Falls, this through girder bridge carries the former Soo Line over Paint Creek, which is part of the impounded Lake Wissota. The first bridge at this location was likely a timber pile trestle, located slightly north of the current structure. In 1891, the bridge was rebuilt, and a short 32-foot Fink truss was included with pile trestle approaches. The bridge was again rebuilt in approximately 1900, using a concrete span. After flooding undercut the bridge in 1911, it was decided to replace the structure with a larger steel bridge. The bridge was again rebuilt in 1916 with the present structure. Prior to creating Lake Wissota in 1917, the bridge was nearly 50 feet above the creek below. After the creation of Lake Wissota, the bridge now crosses only a few feet above the water. Currently, the bridge consists of an 80-foot and two 50-foot through plate girder spans, set onto concrete substructures. The girder spans use a standard design, with traditionally composed floors and rounded girder ends. The center span uses heavier girders, while the outer spans use shallower girders. An unidentified contractor fabricated the bridge, while an unknown contractor constructed the substructure. Through girder spans were commonly used by railroads, as they were durable and easy to construct. Overall, the bridge appears to be in fair condition, with some spalling noted to the concrete substructures. The author has ranked this bridge as being locally significant, due to the common design.
Citations
| Build date | Historic photographs showing construction of bridge |
| Railroad History Citation | ICC Valuation Information, Compiled by Richard S. Steele |