WSOR Cherokee Marsh Bridge


Click the photo to view the full-size version

1/14
Date Taken:
Author:
Caption:

Name WSOR Cherokee Marsh Bridge
Chicago & North Western Railway Bridge #262
Built By Chicago & North Western Railway
Currently Owned By State of Wisconsin (Operated by Wisconsin & Southern Railroad)
Superstructure Contractor Lassig Bridge & Iron Works of Chicago (Main Span)
Unknown (Approach Spans)
Substructure Contractor John A. & George Garden of Romeoville, Illinois (Stone Piers)
Unknown (Concrete Additions)
Length 92 Feet Total, 55 Foot Main Span
Width 1 Track, Formerly 2 Tracks
Height Above Ground 15 Feet (Estimated)
Superstructure Design Deck Plate Girder and Steel Stringer
Substructure Design Stone Masonry and Concrete
Date Built 1896, Approaches Added c. 1935
Traffic Count 2 Trains/Day (Estimated)
Current Status In Use
Chicago & North Western Railway Bridge Number 262
Wisconsin & Southern Railroad Bridge Number 262
Significance Local Significance
Documentation Date 6/24/2018

In 1860, the Beloit and Madison Railroad (B&M) constructed 17 miles of railroad, extending from Beloit, Wisconsin to Magnolia, Wisconsin.  In 1864, the B&M constructed an additional 32 miles of railroad, extending from Magnolia to Madison, Wisconsin.  In 1864, the Madison, Lodi and Baraboo Railroad (ML&B) began grading for a new railroad line, extending from Baraboo, Wisconsin to Merrimac, Wisconsin.  The ML&B was acquired by the Baraboo Air Line Railroad (BAL) in 1870, and began construction on a line extending from Reedsburg, Wisconsin to Madison.  In 1870, the La Crosse, Trempealeau and Prescott Railroad (LCT&P) constructed an additional 29 miles of railroad, extending from the Winona & St. Peter Railroad (W&StP) at Winona, Minnesota to the north side of La Crosse, Wisconsin; constructing a large bridge across the Mississippi River.  The BA&L and the B&M were acquired by the Chicago & North Western Railway (C&NW) in 1871.  The C&NW continued construction, eventually opening a 129 mile line between Madison and present-day Medary on the north side of La Crosse in 1873.  This line was difficult to construct, as it crossed through areas of rugged terrain, requiring three tunnels and numerous wooden trestles.  The LCT&P was purchased by the C&NW in 1876.

Soon after completion, this line became an important route for the C&NW.  The line connected an existing mainline to Chicago with the existing W&StP mainline across southern Minnesota.  In addition, the Chicago, St. Paul, Minneapolis & Omaha Railway (Omaha Road, a C&NW subsidiary) mainline ended at this line in Elroy, Wisconsin, providing the C&NW with a connection to the Twin Cities.  Numerous improvements were made in the late 1870s and throughout the 1880s, including filling wooden trestles and replacing wooden bridges with iron and stone.  The C&NW constructed a short 4-mile branch line from Medary to La Crosse in 1886.  By the late 19th Century, traffic over this route had grown to the point that a second track was necessary.  Between 1896 and 1899, the C&NW completed a second track between Evansville, Wisconsin and Elroy.  By the early 20th Century, the C&NW was operating an expansive railroad network throughout the Midwest, radiating north and west from Chicago.  This line initially served as one of the principal mainlines of the railroad, connecting Chicago to the Twin Cities and the mainline to South Dakota.

Between 1910 and 1912, the C&NW undertook a large construction program to construct shorter routes and streamline operations.  A cutoff between Milwaukee and Sparta opened in 1911, reducing the importance of this line.  Between 1953 and 1956, much of the double track would be removed.  A portion of the line was abandoned between Elroy and Sparta in 1964, and became one of the United States first rail-trail projects.  In 1978, the Sparta to Medary and Winona to Trempeleau, Wisconsin segments would be abandoned, followed by the Beloit to Evansville segment in 1979 and the Medary to Trempeleau and La Crosse segments in 1981.  The Reedsburg to Elroy segment was abandoned in 1987.  All of the line west of Reedsburg would be acquired by the Wisconsin Department of Natural Resources for trail use.  

In 1995, the C&NW would be purchased by Union Pacific Railroad (UP).  In 1996, UP leased the Fitchburg to Reedsburg segment to the Wisconsin & Southern Railroad (WSOR).  In addition, UP attempted to abandon the Evansville to Fitchburg segment the same year.  In response to possibly losing railroad service, the communities of Fitchburg and Oregon purchased the line, although it was out of service.  In 2014, the State of Wisconsin acquired the Fitchburg to Reedsburg line, and contionued to lease it to WSOR.  The same year, WSOR began operations over the Oregon to Fitchburg line, while the Evansville to Oregon segment remains out of service.  Today, WSOR operates the Reedsburg Subdivision between Madison and Reedsburg.  The 400 State Trail uses the former railroad between Reedsburg and Elroy; the Elroy-Sparta State Trail uses the former railroad between Elroy and Sparta; the La Crosse River State Trail uses the former railroad between Sparta and La Crosse; and the Great River State Trail uses the former line between Medary and Marshland.  


View an article discussing this double tracking project (digitalized by Google)

Located on the north side of Madison, this deck plate bridge carries the former Chicago & North Western Railway mainline over the Yahara River (Cherokee Marsh) alongside Wisconsin Highway 113. The first bridge at this location was likely a timber pile trestle, dating to when the line was first built. It is unknown if this structure was rebuilt with an iron structure in the 1880s. In 1896, the C&NW invested significant capital into this line, double tracking the route between Evansville and Baraboo. As part of the work, a new deck plate girder bridge would be constructed at this location. The bridge was altered in approximately 1935, when the original abutments were converted to piers and new steel stringer spans installed at either end. It is possible that this alteration was necessary due to the poor soil conditions beneath the bridge. When the bridge was initially constructed, timber piles were driven 70 feet into the mud beneath the abutments. It is possible that settlement began to appear in the early 20th Century, requiring a partial reconstruction of the bridge. The most recent alteration to the bridge came in 2019, when the north abutment was replaced with a concrete structure, giving the bridge its present configuration. Currently, the bridge consists of a 55-foot deck plate girder span, approached by a 19-foot steel stringer span on the south and an 18-foot steel stringer span on the north. The bridge is set onto stone piers and concrete abutments. While the bridge was initially constructed for two tracks, the eastern track was removed in the mid-20th Century, and possibly reused elsewhere. The deck girder span uses a standard design, with heavy girders and an open deck. The south approach and north approach are similar, using shallow beams. However, the south approach is connected to the main span by a triangular steel riser, while the north approach is connected by a concrete block. The stone substructures use a standard design, with diagonal stepped wing walls. Lassig Bridge & Iron Works fabricated the main span, while an unknown contractor constructed the approaches. John A. & George Garden constructed the stone substructures, using stone quarried at Rock Springs, Wisconsin. An unknown contractor constructed the concrete substructures. Deck plate girder spans were commonly used by railroads, as they were durable and easy to construct. Since the most recent repairs, the bridge has seen no major alterations, and remains in regular use. Overall, the bridge appears to be in fair to good condition, with no significant deterioration noted. The author has ranked this bridge as being locally significant, due to the common design and unknown history.


Citations

Builder and build date (main span) Lassig Bridge & Iron Works plaque
Builder (piers) The Railroad Gazette; January 24, 1896
Railroad History Citation ICC Valuation Information, Compiled by Richard S. Steele

Loading...